Hearths:
All hearths are 50mm thick, with a depth from front to back of 500mm. The front and side edges of the hearth can be left square or softened with a chamfer.
Inner Hearths:
Cut to the width of the opening, the back hearth lines the floor of the recess. Again it is 50mm thick.
Slips:
Slips are used should you wish to reduce the size of the opening.
Liners:
These fit inside the opening and give a quality finish to the back and sides of the recess.
Kerbing:
Kerbing is 75mm x 75mm square and fits around the perimeter of the hearth.